For qualified installers only.
We’re thrilled you’ll be installing our Chrysler / Dodge Minivan Jumpseat.
If you’re comfortable cutting and drilling with power tools this job is for you.
Remember:
- Care must be taken when drilling the rear holes NOT to hit the fuel tank just bellow the floor.
- You will need a “Rivet Nut Gun” with a mandrel for 5/16″ similar to this one https://www.grainger.com/product/GRAINGER-APPROVED-Aluminum-5TUW5
- Installation time takes 2-2.5 hours
Good Luck!
© CSO Radio • 1700 Madison Avenue #240A, Lakewood, NJ 08701 • 732-942-1101